[-Remove]

NX-1700/1800

SOUND PERFORMANCE, SMOOTH OPERATION

Emulating the distinguished NX-3000 and NX-5000 series, the NX-1700H/1800H mobile radio supports multiple protocols including NXDN and DMR as well as mixed digital & FM analog operation. As it’s packed with all the features essential for numerous enterprise and operation-critical applications. It’s also equipped with optimizable TX/RX audio quality, and a customizable front panel that prioritizes simple convenience: operational status is clear at a glance from the white backlit LCD display and 7-color LED indicator.

Features:

• “One Radio” with Multi-protocol Support:
• Designed to operate under an NXDN or DMR digital, and FM analog protocols
• Upgradable Digital/Analog mode by software option (no firmware upgrade required)
• Easy visible, white backlit LCD display:
  Alphanumeric, 10-digit, 13-character frame (aliases and icons)
  7-color LED indicator used to display various radio status
• Renowned KENWOOD Audio Quality: 6 W (max) loud audio and optimizable
• TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings
• Max. 260 Channels per radio, 128 Zones per radio, and 250 Channels per zone
• Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more
• Orange-colored Emergency button & Customizable
• Emergency functions
• Lone Worker
• Remote Stun, Kill, Check
• Dual Priority Scan
• Max/Min Volume setting
• Voice Announcement
• Electronic Serial Number (ESN)
• Display Customization
• D-sub, 15-pin GPIO and audio connector
• GPS connectivity
• Horn Alert and Public Address
• Ignition Sense
• 3.5 mm audio jack for external speaker
• IP54 and MIL-STD 810C/D/E/F/G/H

[-Remove]

NXR-1800E

• UHF 450-520 40-1W RF Output Power (up to 40W @ 50%, 25W @ 100% Duty Cycle)
• Light, Compact and Space-Efficient
• 1.71-inch OLED with Icons and Numeric Displays
• Thermal-Controlled Cooling Fan
• Up to 32 Channels
• Selectable Digital Protocol: DMR Tier II / NXDN Conventional*2 (programmable one at a time)
• USB-A Connector Ready for Audio Accessories
• External In/Out Pin from DB25
• External In/Out Pin from DB25
• Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digitall*2, *3
• Hot Standby System Redundancy
• Built-in IP Network Adapter
• Unicast and Multicast Call Routing
• SNMP Protocol for Direct Reporting to a Generic System*3
• Supports G.711 Audio Codec (for Test onsole and Third-party Applications)
• IP Remote Management (Monitor / Control / Programming / Test Console)
• IPIF to External Applications (for IP Console, OTAP)
• IP Network Voice Logging Interface*3
• Built-in SIP IF (Digital Only)*1, *2
• IP Remote Control Interface (IPRCI)
• Enhanced Security (HTTPS)
• CW ID
• Hang Timer
• Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)*2
• IP Networking Compatible with NXR-5000 (NXDN)*2,*3, legacy KTI-3 (NXDN)*2 and KTI-5 (DMR)*2

[-Remove]

NXR-700/800

Kenwood is pleased to introduce the NXR-700/800 NEXEDGE® repeater. The NXR is available in both VHF and UHF frequency bands, provides analog FM and NXDN® digital operation, and when paired with a power amplifier, can put out up to 250 watts of power, making it an ideal station for both on-site and mountaintop based operation. The versatile NXR Series repeater provides conventional and digital trunking modes of operation, and is the repeater of choice for many advanced, IP based multi-site networks.

Below is a brief list of features. For a complete list of product features and specifications, please download the product brochure.

FEATURES

• 136-150, 146-174 MHz
• 400-430, 450-480, 480-512 MHz
• 40 / 110 / 250 Watt VHF Systems
• 40 / 100 / 250 Watt UHF Systems
• Repeater Operation
• Duplex / Simplex Base Operation
• VHF/UHF models only)
• 30 CH Scanning Base (VHF/UHF Conventional)
• Two-Digit LED / LED Status Indicators
• 6 Programmable Function Keys
• Internal & External Speaker Audio
• Volume Control, Microphone Jack
• Program / Modem Interface
• Remote Terminal Interface
• Programmable AUX I/O's
• DTMF PF Key & AUX I/O Mon/Control